Lucent Technologies 555-233-115 Benutzerhandbuch
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
G3vs with Intel 386 or Risc Processor to R8r
4-8
Remove the Present System
4
Disable TTI
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.
1. Make sure the ISDN is in service. If not, attempt to busy out and release
the ISDN D-channel/link. This will bring the ISDN trunks back into service.
2. Type change system-parameters features and press
Enter.
3. On the second screen, set the
Enabled?
field to n to de-activate the TTI
feature.
Disable Alarm Origination to INADS
1. Type change system-parameters maintenance and press
Enter
.
2. Type neither in the
Alarm Origination to OSS Numbers
field.
3. For some releases of software, disable
Cleared Alarm Notification
and
Restart Notification
field before submitting the form.
!
CAUTION:
If Alarm Origination is not disabled, the system may generate alarms,
resulting in unnecessary trouble tickets.
resulting in unnecessary trouble tickets.
Shut Down DEFINITY LAN Gateway System
!
WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before
powering down the system cabinet can damage the LAN Gateway disk.
powering down the system cabinet can damage the LAN Gateway disk.
1. Log onto the DEFINITY LAN Gateway. See
DEFINITY Communications
System Generic 3 Installation, Administration and Maintenance of
CallVisor ASAI over the DEFINITY LAN Gateway for the procedure to log
on.
CallVisor ASAI over the DEFINITY LAN Gateway for the procedure to log
on.
2. When the main menu appears, select
Maintenance.
3. Select
Reset System from the Maintenance menu.
4. Select
Shutdown from the Reset System menu.
5. Unseat the LAN Gateway assembly from its backplane connectors.