Citrix Systems 5.6 Benutzerhandbuch
46
•
•
•
•
•
•
•
Creating a shared NetApp SR over iSCSI
Device-config parameters for netapp SRs:
Parameter Name
Description
Optional?
target
the IP address or hostname of the NetApp server that hosts
the SR
no
port
the port to use for connecting to the NetApp server that hosts
the SR. Default is port 80.
yes
usehttps
specifies whether to use a secure TLS-based connection to
the NetApp server that hosts the SR [true|false]. Default is
false.
yes
username
the login username used to manage the LUNs on the filer
no
password
the login password used to manage the LUNs on the filer
no
aggregate
the aggregate name on which the FlexVol is created
Required for
sr_create
FlexVols
the number of FlexVols to allocate to each SR
yes
chapuser
the username for CHAP authentication
yes
chappassword
the password for CHAP authentication
yes
allocation
specifies whether to provision LUNs using thick or thin
provisioning. Default is thick
yes
asis
specifies whether to use FAS Deduplication if available.
Default is false
yes
Setting the SR
other-config:multiplier
parameter to a valid value adjusts the default multiplier
attribute. By default XenServer allocates 2.4 times the requested space to account for snapshot and
metadata overhead associated with each LUN. To save disk space, you can set the multiplier to a value >=
1. Setting the multiplier should only be done with extreme care by system administrators who understand
the space allocation constraints of the NetApp filer. If you try to set the amount to less than 1, for example,
in an attempt to pre-allocate very little space for the LUN, the attempt will most likely fail.
Setting the SR
other-config:enforce_allocation
parameter to
true
resizes the FlexVols to
precisely the amount specified by either the
multiplier
value above, or the default 2.4 value.