Cisco Systems Servers Benutzerhandbuch

You can use this procedure to add and configure a AAA client. 

 To add a AAA client, follow these steps: 

In the navigation bar, click Network Configuration.

Result: The Network Configuration section opens.

Do one of the following:

If you are using NDGs, click the name of the NDG to which the AAA client 
is to be assigned. Then, click Add Entry below the AAA Clients table.

To add a AAA client when you have not enabled NDGs, click Add Entry 
below the AAA Clients table.

Result: The Add AAA Client page appears.

In the AAA Client Hostname box, type the name assigned to this AAA client. 

This field does not appear if you are configuring an existing AAA 
client.

In the AAA Client IP Address box, type the AAA client’s IP address or addresses. 

If you want to designate more than one AAA client with a single AAA client 
entry in Cisco Secure ACS, you can specify the IP address for each AAA client 
to be represented by this AAA client entry. To separate each IP address, press 
Enter. You can also use the wildcard asterisk (*) for an octet in the IP address. 
For example, if you want every AAA client in your 192.168.13.1 Class C 
network to be represented by a single AAA client entry, enter 192.168.13.* in 
the AAA Client IP Address box. 

In the Key box, type the shared secret that the AAA client and Cisco Secure ACS 
use to encrypt the data.