Citrix Systems 9.3 Benutzerhandbuch
Figure 1-52.
Citrix NetScaler MPX 22040/22060/22080/22100/22120 (12x1G SFP +
24x10G SFP+), front panel
The following figure shows the front panel of the MPX
22040/22060/22080/22100/22120 (24x10G SFP+) appliance.
22040/22060/22080/22100/22120 (24x10G SFP+) appliance.
Figure 1-53.
Citrix NetScaler MPX 22040/22060/22080/22100/22120 (24x10G SFP+),
front panel
Depending on the model, the appliance has the following ports:
w
RS232 serial Console Port.
w
10/100Base-T copper Ethernet Port (RJ45), also called LOM port. You can use this
port to remotely monitor and manage the appliance independently of the NetScaler
software.
port to remotely monitor and manage the appliance independently of the NetScaler
software.
w
Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1
and 0/2 from left to right. These ports are used to connect directly to the appliance
for system administration functions.
and 0/2 from left to right. These ports are used to connect directly to the appliance
for system administration functions.
w
Network Ports
• MPX 22040/22060/22080/22100/22120 (12x1G SFP + 24x10G SFP+). Twelve
copper or fiber 1G SFP ports and twenty-four 10G SFP+ ports.
• MPX 22040/22060/22080/22100/22120 (24x10G SFP+). Twenty-four 10G SFP+
ports.
Chapter 1
Introduction to the Hardware Platforms
58