Toshiba Satellite R10 Benutzerhandbuch

To check if the SD card slot is good or no good, follow the troubleshooting procedures below 
as instructed. 

Procedure 1:  Check on Windows XP Tablet PC Edition 

Procedure 2:  Connector/Replacement Check 

 

Insert an SD card into the slot. Check if the installed Windows XP Tablet PC Edition 
recognizes automatically the SD card and the data in the SD card can be read. 

If the card is not recognized or data are not read, go to Procedure 2. 

The SD card is connected to the connector IS2130 of the connector board. 

 

Check 1 

The SD card and the system board may be disconnected. Make sure the SD card is 
firmly inserted to the IS2130 of the system board. If the SD card is still not 
functioning properly, perform Check 2. 

Check 2 

The SD card may be faulty. Replace it with a new one following the step in 
Chapter 4. If the problem continues, perform Check 3. 

Check 3 

The system board may be faulty. Replace it with a new one following the step in 
Chapter 4.