Toshiba Satellite R10 Benutzerhandbuch

Seite von 384
4.12 Mini PCI module  
4 Replacement Procedures  
4-30 
 
Satellite R10 Maintenance Manual  (960 -509)  
4.12  Mini PCI module 
Removing the Mini PCI module 
The following describes the procedure for removing a Mini PCI module. (See Figure 4-
18.) 
1.   Disconnect the speaker cable  from the connector CN6150 on  the system board 
and pull out  the cable from the guide of mini PCI cover. 
2.   Remove the following  screws  securing the mini PCI cover and remove the mini 
PCI cover
M2.0x4.0Z  
 
BIND screw   
 
 
 
 
x1 
3.   Disconnect the wireless LAN antenna cables from the connectors on the wireless 
LAN card. 
4.   Open the left and right latches securing the wire less LAN card and remove the 
wireless LAN card from  the connector CN9991 of mini PCI. 
 
 
 
Figure 4-18  Removing the Mini PCI module  
M2.0x4.0Z BIND 
Mini PCI cover 
Speaker cable 
CN6150 
Wireless LAN card