APC PMP3DS-A Benutzerhandbuch

 

START

Possible diagnostic

display board failure.

Replace diagnostic

display panel. 

Is 

power

being supplied

to the

SPD?

Green phase LED(s)

not lit. And, no

Red LED(s) lit and 

no Alarm on.

Energize SPD

and verify proper

connection.

NO

YES

START

YES

NO

Red phase

LED(s) lit.

Check the power

utility feed and 

verify voltage 

levels.

Replace module(s)

that do not have

LEDs lit.

Energize SPD

and verify proper

connection.

Possible diagnostic

display board failure.

Replace diagnostic

display panel. 

Alarm

on?

Is alarm

Enable/Disable

LED on?

Press 

alarm Enable/

Disable switch. 

Is alarm

on?

Is alarm

LED on?

All module

LEDs on?

Check 

patch cable 

connections.* Is

Red LED(s) 

on?

Check

the voltage 

on each phase. 

Is the voltage

correct?

NO

YES

YES

YES

YES

NO

NO

YES

NO

NO

NO

Replacement parts are available. For ordering information, contact APC
Customer Service 1-800-800-4272.

APC MODULAR PANEL PRODUCTS Surge Protective Device (SPD)

 

 

19

* Patch cable is the cable inside the enclosure between the replaceable module(s) and the back side 

of the diagnostic display panel.

For warranty information about your Surge Protection Device, go to the APC

Choose your part number from among the three categories listed under

Hardwire Surge Suppression. A screen containing information specific to

tab to locate the file containing your warranty.

Web site: 

www.apc.com. Choose Products, and then choose Surge Protection

and Power Conditioning. Scroll down to Hardwire Surge Suppression.

your Surge Protection Device is then displayed. Click on the