Fujitsu fi-4340C Benutzerhandbuch
● 5-4
• Paper larger than letter size in width (216 mm) or legal size in length (356 mm)
• Materials other than paper (for example, clothes, metal foil, or OHP film).
• Light-sensitive paper.
• Paper which has perforations and drilling in an end.
• Non-rectangular paper.
• Very thin paper.
• Materials other than paper (for example, clothes, metal foil, or OHP film).
• Light-sensitive paper.
• Paper which has perforations and drilling in an end.
• Non-rectangular paper.
• Very thin paper.
NOTICE
• When scanning a translucent document, set the density to light mode.
• Carbonless papers have a chemical composition that damages the Pad and the rollers which send a
• Carbonless papers have a chemical composition that damages the Pad and the rollers which send a
paper (Pick roller etc). Therefore, note the following:
Cleaning
: If mispicks occur frequently, clean the Pad and Pick roller in accordance with
the “Cleaning and Maintenance” manual.
the “Cleaning and Maintenance” manual.
Replacement of parts :The life of the Pad and Pick roller may be shorter than if PPC paper
documents are fed.
• The leading edge of all documents fed using the ADF should be straightened so the curl of the paper
meets the specifications shown below:
• To prevent roller smudging, avoid scanning a document filled out in a pencil.
Clean the roller as ofen as possible when scanning many document.
Less than
3mm
More than 30mm
Feed direction
Read surface
Top of the paper
More than 30mm
Feed direction
Read surface
Top of the paper
Less than
5mm