Fujitsu fi-4990C Benutzerhandbuch

6-5

Remarks

Displayed in setup mode selected by turning
power on with

pressed.

Displayed in setup mode selected by turning
power on with

pressed.

Displayed in setup mode selected by turning
power on with

pressed.

Displayed in setup mode selected by turning
power on with

pressed.

• Displayed in setup mode selected by turning

power on with

pressed.

• Setup functions allocated to

and

buttons are always valid

regardless of this setting.

Displayed in setup mode selected by turning
power on with

pressed.

Displayed in setup mode selected by turning
power on with

pressed.

Displayed in setup mode selected by turning
power on with

pressed.

The details and the operation method, please
refer to the “M4099D/M4099DC/fi-4990/fi-4990C
Image Scanner Operator’s Guide : Option”.

Setup item

TP_IF baud rate

SCSI ID

Product ID

Pre-pick

Pick start time

Manual feed timeout

Paper pick retry

Paper feed retry

Function key

Setup mode lock

Language

White follower mode

Interface Board slot

SCSI Bus Width setting

* Printing Position

Description

Selects the control data transfer rate (2400,
4800, 9600, or 19200) for the TP interface.

Sets the SCSI ID of this scanner.

Sets the product ID of this scanner.

Enables or disables pre-picking.

Sets the period from when paper is loaded
manually to when the pick operation starts.

Sets the waiting period from when the host
computer issues a scan command to when
paper is loaded manually.

Sets the pick motor operation time and retry
count.

Sets the feed motor operation time and retry
count.

Allocates setup functions to

and

buttons.

Inhibits the operator panel from entering
setup mode from normal mode.

Select the Operation Panel LCD display
language (Japanese/English).

Selects the white Level follower operation “0”
means default “1”means operate like
M3099X scanner.

Selects the Interface Board Slot “1” or “2”.

When connects Narrow SCSI card, Selects
“8 bit”.

Set the Endorser print start position.

* If the option is not mounted, the set up item for the option does not display on the screen and skips

to the next item.

13C6.P65

01.2.17, 5:46 PM