Honeywell IS4911 Benutzerhandbuch
6
IS4910-01 / IS4911-01 Non-Decode Engine Dimensions
The -01 engine model
includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping
screws. Two additional Ø .098" ± .002 [2.5 mm ±.05 mm] clearance holes are provided as a secondary
mounting option. The clearance holes are located on tabs that extend from the sides of the engine's chassis.
A keying location point is provided on the bottom of the engine to assist with alignment.
mounting option. The clearance holes are located on tabs that extend from the sides of the engine's chassis.
A keying location point is provided on the bottom of the engine to assist with alignment.
Warning: The limited warranty (on page 31) is void if the following guidelines are not adhered to when
mounting the engine.
When securing the engine with self-tapping screws:
• Use M2.2 x 4.5 Philips pan head, type AB, steel, zinc clear, Trivalent self-tapping screws.
• Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg]
• Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg]
of torque during screw installation.
• Use a minimum mount thickness of 0.3 mm.
• Use safe ESD practices when handling and mounting the engine.
• Use safe ESD practices when handling and mounting the engine.
Figure 5. IS4910-01 / IS4911-01 Dimensions