Hand Held Products 2020/5620 Benutzerhandbuch
1 - 5
Base Charge Mode
In order for the battery to be charged, there must be enough voltage for the
circuitry to work. There are three conditions during which power can be supplied
to the base:
circuitry to work. There are three conditions during which power can be supplied
to the base:
Condition 1:
9VDC power supply connected to the barrel connector
Condition 2:
12VDC host power source only
Condition 3:
5VDC host power source only
The chart below describes each selection by condition.
Using a slow charge rate draws less current (power) from the input power source
when the battery is mostly discharged.
when the battery is mostly discharged.
Scan the appropriate bar code for your application.
Default = Automatic.
Condition 1
Condition 2
Condition 3
Automatic
Fast Charge
Slow Charge
No Charge
Full Charge Rate
Fast Charge
Fast Charge
No Charge
Low Charge Rate
Slow Charge
Slow Charge
No Charge
Battery Charge Off
No Charge
No Charge
No Charge
* Automatic
Low Charge Rate
Full Charge Rate
Battery Charge Off