Hand Held Products IT4710 Benutzerhandbuch

The Full Report from a typical scan looks like the following (line numbers have 
been added in curly brackets):

{1} B15AJ6T

{2}  >>> PQA from HHP <<<

{3} 4-STATE(British): 34 Bars, nominally from 38.5 to 

42.3 mm. in Width

{4} Bar Sequence: ADHTATDAHDDAADADAADTHTADHHDATHTADH

{5} [A] (Ok) < "Tall" Bar Extensions: 2.79 mm. from cen-

ter

{6} [F] (Hi) < "Short" Bar Extensions: 1.00 mm. from 

center

{7} [B] (Hi) < Bar Widths = 0.60 mm.

{8} [A] (Ok) < Inter-Bar Gaps = 0.59 mm.

{1} is the Encoded Message.

{2} is the Banner heading.

{3} identifies the Symbology, 4-STATE (British, or KIX, Canadian, Japanese, 

or Australian), and also lists this symbol's size and allowed range of mea-
sured width.

{4} lists the Bar Sequence, "A" representing Ascending bars, "D" representing 

Descending bars, "T" representing Tracker (short) bars, and "H" represent-
ing tall bars that both ascend and descend.

{5} lists the Average Extension from the centerline of the tall ascenders and 

descenders, as specified  in Table 1.

In Screening modes, this parameter is reported as ""Tall" Bar Extensions are 
too Short (or Long) (0.xxx in.)" when that is the case.

{6} lists the Average Extensions from the centerline of the Short tracks, as 

specified in Table 1.

In Screening modes, this parameter is reported as "Short" Bar Extensions are 
too Short (or Long) (0.xxx in.)" when that is the case.

{7} lists the Average Width of the bars, as specified  in Table 1.

{8} lists the Average Space Width between bars, as specified  in Table 1.