Motorola DS3478 Benutzerhandbuch

Symbologies 13 - 45

To enable or disable Codabar, scan the appropriate bar code below.

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) 
the code contains. Set lengths for Codabar for any length, one or two discrete lengths, or lengths within a specific 
range. 

One Discrete Length - This option allows the digital scanner to decode only those Codabar symbols containing a 
selected length. Use the numeric bar codes in 

 to select the length. For example, 

to decode only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed 
by 4. In case of an error, or to change the selection, scan Cancel on

Two Discrete Lengths - This option allows the digital scanner to decode only those Codabar symbols 
containing either of two selected lengths. Use the numeric bar codes in 

 to select 

lengths. For example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two 
Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan Cancel 
on

.

Length Within Range - This option allows the digital scanner to decode a Codabar symbol within a specific 
length range. Use the numeric bar codes in 

 to select the length range

. 

For 

example, to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length 
Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero for single digit numbers). In case of an error, or to 
change the selection, scan Cancel on

.

Any Length - This option allows the digital scanner to decode Codabar symbols containing any number of 
characters within the digital scanner’s capability.