Epson 1200 series Benutzerhandbuch
7-2
Maintenance and Troubleshooting
R4C448
Rev. C
Rev. C
A5 size
CHAP7.FM
2/11/00
Pass 3
L
Proof Sign-off:
tanto name
tanto name
SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name
editor name
SEI M.Kauppi
Maintenance
Cleaning the scanner
To keep your scanner operating at its best, you should clean it
periodically, as described below.
periodically, as described below.
1. Unplug the power cord.
2. Clean the outer case with mild detergent and water.
3. If the glass of the document table gets dirty, clean it with a
soft dry cloth. If the glass is stained with grease or some other
hard-to-remove material, use a small amount of glass cleaner
and a soft cloth to remove it. Wipe off all remaining liquid.
hard-to-remove material, use a small amount of glass cleaner
and a soft cloth to remove it. Wipe off all remaining liquid.
Be sure that there is no dust on the glass of the document table.
Dust can cause spots in your scanned image.
Dust can cause spots in your scanned image.
w
Caution:
❏ Be careful not to scratch or damage the glass of the document
❏ Be careful not to scratch or damage the glass of the document
table, and do not use a hard or abrasive brush to clean it. A
damaged glass surface can decrease the scanning quality.
damaged glass surface can decrease the scanning quality.
❏ Never use alcohol, thinner, or corrosive solvent to clean the
scanner. These chemicals can damage the scanner
components as well as the case.
components as well as the case.
❏ Be careful not to spill liquid into the scanner mechanism or
electronic components. This could permanently damage the
mechanism and circuitry.
mechanism and circuitry.
❏ Do not spray lubricants inside the scanner.
❏ Never open the scanner case.