Uniden BC246T Benutzerhandbuch
34
Setting Up Your Scanner
Connecting an Earphone/Headphone
For private listening, you can plug a
1
/
8
-inch (3.5 mm)
mini-plug earphone or headphones (not supplied) into the
headphone jack on top of your scanner.
This automatically disconnects the internal speaker.
See “Earphone Warning” at the front of the manual for
important information about using an earphone/
headphone.
headphone jack on top of your scanner.
This automatically disconnects the internal speaker.
See “Earphone Warning” at the front of the manual for
important information about using an earphone/
headphone.
Connecting an Extension Speaker
In a noisy area, an optional amplified extension speaker,
positioned in the right place, might provide more
comfortable listening. Plug the speaker cable's
positioned in the right place, might provide more
comfortable listening. Plug the speaker cable's
1
/
8
-inch
(3.5-mm) mini-plug into your scanner's jack.
WARNING!
Never connect anything other than an earphone or the
recommended amplified extension speaker to the
scanner’s headphone jack. This might damage the
scanner.
recommended amplified extension speaker to the
scanner’s headphone jack. This might damage the
scanner.
Attaching the Belt Clip
To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Use a Phillips
screwdriver and the supplied screws to attach the clip to
the scanner.
the go, use the supplied belt clip. Use a Phillips
screwdriver and the supplied screws to attach the clip to
the scanner.
BC246T Paper OM 062405.fm Page 34 Tuesday, June 28, 2005 10:12 AM