Uniden BC246T Benutzerhandbuch
56
Programming Radio Systems
• See “Deleting Systems” on Page 71
• See “Copying Systems” on Page 71
• See “Setting System Frequencies” on Page 56
• See “Entering/Editing Motorola Channel Groups”
• See “Copying Systems” on Page 71
• See “Setting System Frequencies” on Page 56
• See “Entering/Editing Motorola Channel Groups”
Setting System Frequencies
SET FREQUENCIES
E
New FREQUENCY
E
Input a system frequency, then press E.
To enter additional frequencies, press
, use the scroll
control to select New Frequency, then repeat the above.
Note: If you select Control Channel Only mode (see “Set-
ting Control-Channel Only (Motorola Systems Only)” on
Page 70), you only need to enter the frequency(s) that
can be assigned as the control channel. Most frequency
lists usually indicate which of the frequencies are the
control channel frequencies. Otherwise, you must enter
all of the frequencies.
ting Control-Channel Only (Motorola Systems Only)” on
Page 70), you only need to enter the frequency(s) that
can be assigned as the control channel. Most frequency
lists usually indicate which of the frequencies are the
control channel frequencies. Otherwise, you must enter
all of the frequencies.
Entering/Editing
Motorola Channel Groups
Motorola Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
group (or groups) to hold the channels. Then, enter the
channel and channel parameters in the group(s).
Setting Up a Channel Group
Edit Group
E
New Group
E
The scanner creates a group with a default name of
Group nn
Group nn
. nn increments by one for each new group you
create within a system.
Menu
BC246T Paper OM 062405.fm Page 56 Tuesday, June 28, 2005 10:12 AM