Uniden BC246T Benutzerhandbuch
78
Programming/Editing Optional Settings
This setting selects the frequency step used for setting
the channel's. Select your setting, then press E.
the channel's. Select your setting, then press E.
Auto
- the step is based on the band (see the table at the
front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 10.0 kHz, 12.5 kHz, 15.0 kHz,
20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz
20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz
- The scanner
uses the selected step.
Note: The scanner defaults to Auto.
Setting Channel Lockout
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Lockout
E
This setting determines whether the scanner will scan this
channel when its system and group are enabled. Select
your setting, then press E.
channel when its system and group are enabled. Select
your setting, then press E.
Lockout
- the channel is not scanned.
Unlocked
- the channel is scanned.
Notes:
• The default setting is Unlocked.
• You can also lock or unlock a channel by selecting it
• You can also lock or unlock a channel by selecting it
while scanning or holding, then pressing L/O.
See “Basic Operation” on Page 41.
See “Basic Operation” on Page 41.
Deleting Channels
program system
E
Select the system
E
Edit Group
E
Select the group
E
Menu
Menu
BC246T Paper OM 062405.fm Page 78 Tuesday, June 28, 2005 10:12 AM