Toshiba 556. 656 Benutzerhandbuch

Changing Scan Settings    53

„

You may want to scan originals with the original cover left open especially when they are as small as a drivers license or 
as thick a book as a dictionary. In this case, the open cover admits light to the Original Glass surface, producing a scan 
image with a black outer frame. This black frame can be erased using the Outside Erase feature.

[ON] — Select this option to enable the Outside Erase feature. Pressing the button makes the Range Adjustment slider 
available.
[OFF] — Select this option to disable the Outside Erase feature.

RANGE ADJUSTMENT — Use 

 and 

 to select the appropriate sensitivity from 7 levels to detect the boundary 

between the image and outer frame. The higher the level, the more area is erased.

The sensitivity level for detecting images and the outer frame can be changed for each job using the control panel.

y

Regardless of the settings, this feature is disabled under the following conditions:

- The Document Cover is closed at the time of scanning.
- The originals are scanned from the Reversing Automatic Document Feeder.

y

Set the appropriate exposure manually. Enabling Outside Erase cancels the automatic exposure adjustment 
feature.

y

The feature may not produce an appropriate output when your original contains a concave shaped image with a 
dent.

y

The margins may not be erased correctly under the following conditions:

- Light intrudes into the margin area of the original placed on the Original Glass.
- Hands or fingers holding the original on the Original Glass are scanned.

y

To use this feature in the models below, specify the original size.

- e-STUDIO2550C Series
- e-STUDIO2551C Series

OFF

ON