Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sharp
  4. MX-FX13
  5. Benutzerhandbuch

Sharp MX-FX13 Benutzerhandbuch

Download
Seite von 119
110
SYSTEM SETTINGS
FW. RX DATA
This setting is used to select whether or not received 
faxes are forwarded to a fax machine programmed as 
explained in "RECEIVED DATA FW. STATION SET" 
(page 110) in the event that the machine cannot print 
the faxes. The setting is initially disabled.
1
Follow steps 1 through 6 of "INITIAL 
PROCEDURE" (page 98).
2
Select "RCV. FUNCTION" with the [
] or 
[
] key and then press the [OK] key.
3
Select "FW. RX DATA" with the [
] or [
] 
key and then press the [OK] key.
• The setting is enabled and a checkmark appears in 
the checkbox.
• If the procedure is performed when the setting is 
enabled, the checkmark will be cleared and the 
setting disabled.
RECEIVED DATA FW. STATION SET
When a problem prevents the machine from printing a 
received fax, the fax forwarding function (page 49) can 
be used to forward the received fax to another fax 
machine. Use this setting to program the fax number of 
the destination fax machine. Only one fax number can 
be programmed (maximum of 50 digits).
To specify an F-code confidential box in the 
destination fax machine, enter the sub-address and 
passcode after the fax number in steps 6 and 7 below.
1
Follow steps 1 through 6 of "INITIAL 
PROCEDURE" (page 98).
2
Select "RCV. FUNCTION" with the [
] or 
[
] key and then press the [OK] key.
3
Select "RECEIVED DATA FW. STATION 
SET" with the [
] or [
] key and then 
press the [OK] key.
4
Select "STORE" with the [
] or [
] key 
and then press the [OK] key.
5
Enter the forwarding fax number with the 
numeric keys and then press the [OK] key.
6
Enter the sub-address with the numeric 
keys and then press the [OK] key.
If you do not need to specify an F-code confidential box 
in the destination fax machine, press the [OK] key 
without entering anything.
7
Enter the passcode with the numeric keys 
and then press the [OK] key.
If you do not need to specify an F-code confidential box 
in the destination fax machine, press the [OK] key 
without entering anything.
EARLIER OUTPUT
When a received fax cannot be printed because the 
machine is out of appropriate paper and a fax is 
subsequently received that can be printed, this setting 
determines whether the subsequent fax is printed 
before the fax that cannot be printed. The setting is 
initially enabled (the subsequent fax is printed first).
1
Follow steps 1 through 6 of "INITIAL 
PROCEDURE" (page 98).
2
Select "RCV. FUNCTION" with the [
] or 
[
] key and then press the [OK] key.
3
Select "EARLIER OUTPUT" with the [
] or 
[
] key and then press the [OK] key.
• The setting is enabled (the subsequent fax is printed 
first) and a checkmark appears in the checkbox.
• If the procedure is performed when the setting is 
enabled, the checkmark will be cleared and the 
setting disabled.
ANTI JUNK FAX
When this setting is enabled, reception from fax 
numbers programmed using the "ENTER JUNK FAX 
#" program will be blocked.
This program is normally disabled.
1
2
Select "RCV. FUNCTION" with the [
] or 
[
] key and then press the [OK] key.
3
Select "ANTI JUNK FAX" with the [
] or 
[
] key and then press the [OK] key.
• The setting is enabled and a checkmark appears in 
the checkbox.
• If this procedure is performed when the setting is 
enabled, the checkmark will be cleared and the 
setting disabled.
This setting only operates when the fax 
number of the machine that is to receive the 
forwarded faxes is programmed.
Note
To delete the number, follow these steps:
(1) Select "DELETE" in step 4 and then 
press the [OK] key.
(2) Select "DELETE" with the [
] or [
] 
key and then press the [OK] key.
Note