Radio Shack 20-107 Benutzerhandbuch

When checked, the selected object will not be scanned and 

the Locked Out status is not changed when the Main Menu’s 

“Restore Skipped” utility is used. Locked Out objects are 

indicated by an “L ” in the Channel Status Indicator, for 

example, “p L D ” indicates that the object is locked out. 

When checked, the selected object is skipped and will 

not be scanned. Skipped status is restored when the Main 

Menu’s “Restore Skipped” utility is used. See also “Skipping 

When checked, priority is enabled for the selected object. 

Priority causes the scanner to check for activity more fre-

quently. Priority status is indicated in the Channel Status 

Indicator: Lower case “p ” indicates that priority is not 

enabled for the object, and upper case “P ” indicates that 

priority is enabled for the object. 
n Note: Priority Mode must be enabled in the Settings Menu
to use the Priority feature. See “Changing iSCAN’s Settings” on page 
31. 

When checked, delay is enabled for the selected object. 

Delay causes the scanner to wait for two seconds after 

a transmission to receive reply traffic before resuming 

scanning.

When checked, attenuation is enabled for the selected 

object. Attenuation helps reduce interference from strong 

local transmitters. Attenuate is not available in the Object 

Menu for trunked talkgroups.

Defines an audible alarm that is heard whenever there is 

activity on the object. Press  or  to select the desired 

alarm sound.

Defines backlight behavior for the selected object. Press  

or  to select the desired light behavior. The options are: 

•

Leave – use default backlight settings 

•

On – turn the backlight on 

•

Flash – flash according to the Flash Pattern setting

Defines a 32-step pattern used when the Light Mode is 

set to Flash. To set the Flash Pattern, follow the on-screen 

instructions and press , , ,  to set the pattern value. 

See “Flash Patterns” on page 50 for pattern codes and additional 

information. 

Control the backlight-on duration for each of the 32 steps in 

the Flash Pattern. To set the On Time, follow the on-screen 

instructions and press , , ,  to set the On Time in 10 

millisecond increments.

Control the backlight-off duration for each of the 32 steps in 

the Flash Pattern. To set the Off Time, follow the on-screen 

instructions and press , , ,  to set the Off Time in 10 

millisecond increments.

Removes the object from iSCAN’s working memory configu-

ration. This does not alter the Library data, so if necessary, 

the object can be imported to iSCAN’s Playlists again. To 

delete the current object, Press  and follow the on-screen 

instructions.

Use the Settings Menu to customize iSCAN’s factory default settings. 
To access the Settings Menu, press MENU until the Main Menu 
appears, scroll to 

Settings,

 and press 



.

Jumps to the Main Menu.

Jumps back (typically to the Main Menu).

Saves the changes made to the Settings options.

Restores all items in the Settings Menu to their 

factory default values.

Disable this option to display more information 

about objects. By default, iSCAN operates with 

a simplified display that only shows object and 

playlist names.