Sony SNT-V304 Benutzerhandbuch
15
Relay-OUT Settings
• When an alarm event occurs while the pop-up
window is displayed, the time set for the [Alarm
duration] is extended. A second pop-up window will
not appear.
duration] is extended. A second pop-up window will
not appear.
Upload Settings
[Upload (FTP)] settings are made through dialog boxes
that are displayed for [Input 1] (Video Input 1) to
[Input 4] (Video Input 4).
that are displayed for [Input 1] (Video Input 1) to
[Input 4] (Video Input 4).
Setting
Primary Time
Enabled
Enabled
Always
Restricted
Between
Between
Start
Stop
Mon to Sun
Primary Image
Frequency
Frequency
Take Pictures
Secondary Time
Enabled
Enabled
Secondary Image
Frequency
Frequency
Take Pictures
Host Name
User Name
Password
Use Passive Mode
FTP Port Number
Upload Path
Base File Name
Description
FTP transfer is enabled when this box
is checked.
is checked.
FTP transfer is always enabled when
this radio button is selected.
this radio button is selected.
Alarm input is enabled for a specific
time of day when this radio button is
selected.
time of day when this radio button is
selected.
When the [Restricted Between] radio
button is selected, enter the start time
here.
button is selected, enter the start time
here.
When the [Restricted Between] radio
button is selected, enter the stop time
here.
button is selected, enter the stop time
here.
Check the boxes to specify particular
days on which the FTP transfer should
be enabled.
days on which the FTP transfer should
be enabled.
Sets the FTP image transfer interval.
Select any of seconds, minutes, or
hours, then input the time (a numerical
value).
Select any of seconds, minutes, or
hours, then input the time (a numerical
value).
Selects the FTP transfer conditions.
Select this check box to enable alarm
input when outside the time range set
with [Primary Time Enabled].
input when outside the time range set
with [Primary Time Enabled].
Sets the FTP image transfer interval.
Select any of second, minute or hour,
then input the time (a numerical value).
Select any of second, minute or hour,
then input the time (a numerical value).
Selects the FTP transfer conditions.
Enter the host name of the transfer
destination.
destination.
Enter the user’s name on the host at
the transfer destination.
the transfer destination.
Enter the password of the above user.
To use Passive mode, select this
check box.
check box.
Enter the port number.
Enter the path of the save destination
for image files sent by ftp to a host.
for image files sent by ftp to a host.
Enter the file name prefix (the fixed
part of the file name) to be assigned to
image files sent.
part of the file name) to be assigned to
image files sent.
Setting
Overwrite
Date/Time Suffix
Sequence Number
Suffix set to
Maximum
Suffix set to
Maximum
Sequence Number
Suffix up to:
Suffix up to:
Description
To always overwrite the same file
name, select this radio button.
name, select this radio button.
Select this radio button to append the
date and time to the base file name.
date and time to the base file name.
Select this radio button to append a
sequential number to the prefix.
sequential number to the prefix.
When appending a sequential number
to the prefix, select this radio button
and enter a value to specify a
maximum for the number.
to the prefix, select this radio button
and enter a value to specify a
maximum for the number.
Setting
Taggle
Timed duration
Description
Select this radio button to activate or
deactivate relay output by clicking the
[RELAY] button.
deactivate relay output by clicking the
[RELAY] button.
Select this radio button and enter the
relay output activation time in the box
to activate timed relay output by
clicking the [RELAY] button. You can
set this between 1 and 30 seconds.
relay output activation time in the box
to activate timed relay output by
clicking the [RELAY] button. You can
set this between 1 and 30 seconds.
Note
To control relay output with the [RELAY] button, you
must make settings that keep the alarm input from
activating or deactivating relay output. Select [Alarm]
using the “Layout and Application Wizard” (see page
13) and set [Relay-OUT at Alarm] to [Disable].
must make settings that keep the alarm input from
activating or deactivating relay output. Select [Alarm]
using the “Layout and Application Wizard” (see page
13) and set [Relay-OUT at Alarm] to [Disable].
Network Settings
The
(Network Settings) icon is used for settings
related to the supporting network protocol. Clicking
the “Network Setting”s icon displays the following
screen.
the “Network Setting”s icon displays the following
screen.