Panasonic AWHE60SN Benutzerhandbuch
13
Shooting
When performing the operations
using the wireless remote control
p
qChanging the camera’s direction
Moving the camera toward the left or right (panning):
Press the [] or [] button.
Press the [] or [] button.
Moving the camera up or down (tilting):
Press the [] or [] button.
Press the [] or [] button.
Moving the camera diagonally:
Press the [] or [] button and [] or [] button at
Press the [] or [] button and [] or [] button at
the same time.
Returning the camera to the reference position:
Press the [HOME] button for 2 seconds.
Press the [HOME] button for 2 seconds.
p
qUsing the zoom function
Zooming in (the subject becomes magnified in size):
Press the [T] button of [ZOOM].
Press the [T] button of [ZOOM].
Zooming out (the subject becomes reduced in size):
Press the [W] button of [ZOOM].
Press the [W] button of [ZOOM].
p
qSwitching the direction or zoom speed
Changing the direction or zoom at high speed:
Press the [FAST] button.
Press the [FAST] button.
When this button is held down, the speed can be set to
an even higher speed.
When it is tapped, the normal speed (high speed) is
restored.
an even higher speed.
When it is tapped, the normal speed (high speed) is
restored.
Changing the direction or zoom at low speed:
Press the [SLOW] button.
Press the [SLOW] button.
When this button is held down, the speed can be set to
an even lower speed.
When it is tapped, the normal speed (low speed) is
restored.
an even lower speed.
When it is tapped, the normal speed (low speed) is
restored.
The lens focus control speed is also changed at the same
time.
When performing the operations using the controller
p
qChanging the camera’s direction
Moving the camera toward the left or right (panning):
Tilt the [PAN/TILT] lever toward L or R.
Tilt the [PAN/TILT] lever toward L or R.
Moving the camera up or down (tilting):
Tilt the [PAN/TILT] lever toward UP or DOWN.
Tilt the [PAN/TILT] lever toward UP or DOWN.
Moving the camera diagonally:
Tilt the [PAN/TILT] lever diagonally.
Tilt the [PAN/TILT] lever diagonally.
Returning the camera to the reference position:
If the controller has a [HOME] button, press the
If the controller has a [HOME] button, press the
[HOME] button.
p
qUsing the zoom function
Zooming in (the subject becomes magnified in size):
Tilt the [ZOOM] lever toward the TELE direction.
Tilt the [ZOOM] lever toward the TELE direction.
Zooming out (the subject becomes reduced in size):
Tilt the [ZOOM] lever toward the WIDE direction.
Tilt the [ZOOM] lever toward the WIDE direction.
p
The indicator displays of the AW-RP655 are
indicators that show the positions of the optical
zoom. They will not work for electronic zooming.
zoom. They will not work for electronic zooming.
Note
p
qChanging the direction or zoom speed
AW‑RP655 and AW‑RP555
1
Press the [SPEED] button.
Each time the [SPEED] button is pressed, the control
speed is switched between the high speed (the button’s
lamp is off) and low speed (the button’s lamp is lighted).
The lens focus control speed is also changed at the
same time.
speed is switched between the high speed (the button’s
lamp is off) and low speed (the button’s lamp is lighted).
The lens focus control speed is also changed at the
same time.
AW‑RP50
Refer to the Operating Instructions of the controller.