McCall Refrigeration MCCR27 Benutzerhandbuch

2

Receiving & Inspecting Equipment ................................................. 2
Specifications .................................................................................. 3
Installation ...................................................................................... 3
Caster Installation ........................................................................... 4
Caster/Leg Mounting Detail ............................................................ 4
Refrigeration Operation ................................................................... 5
Evaporator Fan Operation ............................................................... 5
Freezer Operation ............................................................................ 6
Door Hinge Reversal Instructions ................................................... 7
Door Hinge Reversal Templates ...................................................... 8
Maintenance ...............................................................................9-10
Refrigerator Wiring Diagram ......................................................... 11
Refrigerator Replacement Parts .................................................... 11
Freezer Wiring Diagram ................................................................ 12
Freezer Replacement Parts ........................................................... 12
Standard Labor Guidelines ............................................................ 13
Manufacturers Limited Warranty .................................................. 14
Standard Warranties ..................................................................... 15

The serial number is located on the right side interior back wall 

or under the top nosing directly above the right door.

Always have the serial number of your unit available when calling 

for parts or service. A complete list of authorized McCall parts 

depots is on www.mccallrefrigeration.com.

This manual covers standard units only. If you have a custom 

unit, consult the customer service department at 1-888-732-

2446

©2011 McCall. All rights reserved. Reproduction without written permission 

is prohibited.

Even though most equipment is shipped crated, care should 

be taken during unloading so the equipment is not damaged 

while being moved into the building.

1.  Visually inspect the exterior of the package and skid or  

container.  Any damage should be noted and reported to 

the delivering carrier immediately.

2.  If damaged, open and inspect the contents with the 

carrier.

3.  In the event that the exterior is not damaged, yet upon 

opening, there is concealed damage to the equipment 

notify the carrier.  Notification should be made verbally 

as well as in written form.

4.  Request an inspection by the shipping company of the 

damaged equipment.  This should be done within 10 days 

from receipt of the equipment.

5.  Check the lower portion of the unit to be sure legs or 

casters are not bent.

6.  Be sure to check the compressor compartment housing 

and visually inspect the refrigeration package.  Be sure 

lines are secure and base is still intact.

7.  Freight carriers can supply the necessary damage forms 

upon request.

8.  Retain all crating material until an inspection has been 

made or waived.