Frigidaire IM115 Benutzerhandbuch

3

1. Unplug refrigerator from wall outlet.
2. Remove ice tray rack from freezer (some models).
3. Remove freezer shelf (some models) by pushing shelf

to left until right side of shelf is out of hole. Slowly lift

up and pull on shelf to remove.

4. Remove plugs from inside freezer compartment

with putty knife.

5. If refrigerator has exterior condenser (C), go to rear of

refrigerator and locate left condenser mounting bracket

screw(s). Remove and save screws. DO NOT remove

compressor sound baffle (A), if installed.Carefully bend

condenser out away from back of refrigerator.
If condenser is mounted inside compressor

compartment (D), remove screws securing

sound baffle to cabinet (B).

7. With needle nose pliers, remove foam from hole.

8. Push water inlet tube into small hole on back of

refrigerator. Rotate while inserting tube until flat

surface of inlet tube is tight against back of

refrigerator.

6. Peel off label covering ice maker hole.