Blomberg KWD 9440 XA++ Benutzerhandbuch

EN

25

Sliding Body Shelves
Sliding body shelves can be 

pulled by slightly lifting up from 

the front and moved back and 

forth. They come to a stop 

point when pulled towards front 

to allow you reach the foods 

placed at the back of the shelf; 

when it is pulled after slightly 

lifting upwards at the second 

stop point, the body shelf will be 

released.

The shelf should be held tightly 

from the bottom as well in 

order to prevent it from tipping 

over. The body shelf is placed 

on the rails at the sides of the 

refrigerator body by bringing it 

to one lower or one upper level.

The body shelf should be 

pushed backwards to seat it 

completely.

It is normal for the first few glasses of 
water taken from the dispenser to be 
warm.
In cases where the water dispenser 
has not been used frequently, sufficient 
amount of water must be drained from 
the dispenser to get fresh water.

Water drops that drip during use, 
accumulates in the spillage tray. You 
can remove spillage tray by pulling it to 
yourself. You can remove the water with 
a sponge or a soft cloth.