Dacor DHI482 Benutzerhandbuch

Separate the bottom framework piece from the top

6.

framework piece. The top frame work piece has 5-inch

slots on the the sides. The bottom piece has a series of

holes on the sides.
Position the bottom framework piece on top of the

7.

hood. Slide the studs on the top of the hood into the

holes on the bottom of the framework piece. The cut-

outs for the wiring allow the bottom framework piece

to fit on only one way. If it does not fit properly, turn it

180° so that the cut-outs line up. Make sure all wiring is

tucked inside the framework piece and are not pinched.

Use eight provided lock washers and nuts to secure the

8.

bottom framework piece to the top of the hood.

i

nsTallaTion

 i

nsTruCTions

Attach the hood junction box to the rim of the bottom

9.

framework piece using two machine screws as shown.

Attach the external motor terminal block to the rim of

10.

the bottom framework piece using two machine screws

as shown. It mounts on the opposite side of the hood

junction box.