Bahco BE-6990-IP20 Merkblatt
Use
If the screwdriver is turned in the direction of
tightening, you hear a click when the correct torque
has been reached. When undoing screws, there is
no torque limit.
Correct size
The screwdriver has a fixed torque, which is matched to the actual size of the blade.
The size is specified by the identification on the blade and on the handle of the screwdriver.
Changing the blade
As required, the blade can be removed from the handle and replaced by a new blade.
Care must be taken to ensure that the figure on the blade (Nm) agrees with the figure on the handle.
Using different blade profiles
Torque Screwdriver BE-6990-IP can also be fitted with other blade profiles, e.g. slotted, PHILLIPS, POZIDRIV, hex.
Here too the requirement is that the same tightening torque (Nm) is used.
Nm
Nm
MS7044ENG
1
3
2
Application of the sliding T-handle
In order to apply the required torque with
less effort, the self-locking T-handle can be
inserted into the 1/4" female square at the
end of the handle on models
BE-6990-IP20 and BE-6990-IP25.
When the rod has been pushed through
the insert, the screwdriver is secured to the
T-handle.
1
2
=
=
www.bahco.com
Product code
EAN-Code
Nm
731415+
mm
mm
mm
BE-6990-IP6
1846725
0,6
IP6
T6
55
32 x 113
168
100
1
BE-6990-IP7
1846732
0,9
IP7
T7
55
32 x 113
168
100
1
BE-6990-IP8
1846749
1,2
IP8
T8
55
32 x 113
168
100
1
BE-6990-IP9
1846756
1,4
IP9
T9
65
32 x 113
178
100
1
BE-6990-IP10
1846763
2,0
IP10
T10
65
32 x 113
178
100
1
BE-6990-IP15
1846770
3,0
IP15
T15
65
32 x 113
178
100
1
BE-6990-IP20
1848606
5,0
IP20
T20
65
32 x 150
215
337
1
BE-6990-IP25
1848613
7,5
IP25
T25
65
32 x 150
215
337
1