Multiquip HS62 Benutzerhandbuch

■ ALWAYS wear proper respiratory (mask), hearing and eye

protection equipment when operating the saw.

■ ALWAYS hold the saw with both hands when the engine is

running.  Use a firm grip with thumbs and fingers encircling
the handles.

■ ALWAYS

keep all parts of the body away from the cutting-off

blades when the engine is running.

■ ALWAYS keep the handles dry, clean and free of oil or fuel.
■ ALWAYS carry the saw with the engine stopped and the

muffler away from the body.

■ ALWAYS instruct bystanders on where to stand while the

saw is in operation.

■ ALWAYS clear the work area of unnecessary people.
■ NEVER allow anyone to stand in front of or behind the blade

while the engine is running.

■ ALWAYS make sure the blade is not contacting any objects

before starting the engine.

■ ALWAYS check for buried electrical cables before sawing.  If

unsure, contact the local utilities.

■ ALWAYS have all service and maintenance performed by

competent trained service personnel.

■ ALWAYS clean the saw after each day’s use.
■ ALWAYS have a copy of this manual at the job site.
■ ALWAYS  stop the engine before servicing, adding fuel and

oil.

■ ALWAYS  service air cleaner frequently to prevent carburetor

malfunction.

■ ALWAYS  keep clear of rotating or moving parts while the

saw is in operation.

■ ALWAYS maintain this saw in a safe operating condition at

all times.

■ ALWAYS keep any inexperienced and unauthorized people

away from the saw at all times.

■ ALWAYS  store saw properly when it is not being used.

Equipment should be stored in a clean, dry location out of
the reach of children.

General Safety
■ ALWAYS  read, understand, and

follow procedures in Operator's
Manual before attempting to operate
this equipment.

■ ALWAYS  be sure the operator is familiar with proper safety

precautions and operating techniques before using the saw.

■ ALWAYS inspect the blade, flanges and shafts for damage

before installing the blade.

■ ALWAYS use high-speed, reinforced, abrasive blades - 1/8"

(3.17 mm) thick (minimum) or high-speed, diamond blades
specifically rated with a maximum operating speed of at least
5,400 RPM on 14" (350 mm) or  6,200 RPM on 12" (300 mm).

■ ALWAYS use high-speed reinforced, abrasive blades or

high-speed, diamond blades marked with a 1" (25.4 mm)
hole for a 1" (25.4 mm)  flange, or a 20 mm hole for a 20 mm
flange.

■ ALWAYS use abrasive blades or high-speed diamond blades

marked for use with gasoline-powered, hand-held, portable,
abrasive cutting-off saws.

■ ALWAYS read all safety materials and instructions that

accompany any blade used with this saw.

■ ALWAYS inspect each blade carefully before using it. If there

are any signs of damage or unusual wear,  DO NOT USE
THE BLADE.

■ ALWAYS verify the blade arbor hole matches the saw's

spindle before mounting the blade.

■ ALWAYS mount the blade solidly and firmly.  Wrench tighten

the arbor nut.

■ ALWAYS make sure the blade and flanges are clean and

free of dirt and debris before mounting the blade on the saw.

■ ALWAYS use the correct blade for the type of work being

done.  Check with blade manufacturer if you do not know if
blade is correct for desired application.

 NOTE

This saw is designed for certain
applications only. DO NOT use or
modify this saw  for any application
other than for which it was designed.