Southbend SB1019 Benutzerhandbuch

-16-

For Machines Mfg. Since 8/09

Model SB1019

2.  Adjust the downfeed stop bolt and jam nut 

shown in Figure 11 with a 14mm wrench, so 

the bandsaw blade teeth are just below the 

table surface when the cut is complete.

To ensure that your bandsaw arrives without 

damage to the hinge system, a shipping bracket 

was installed. After removing the shipping 

bracket, you will have to adjust the downfeed 

stop bolt. 

1.  Remove the shipping strap hex bolt and 

strap as shown in Figure 10. Keep this 

shipping bracket in case you transport or 

ship the bandsaw in the future.