Cisco Systems OL-6426-02 Benutzerhandbuch

dsl operating-mode auto

!

! Dial backup interface, associated with physical BRI0 interface. Dialer pool 1 associates 

it with BRI0’s dialer pool member 1. Note “dialer watch-group 1” associates a watch list 

with corresponding “dialer watch-list” command

interface Dialer0

ip address negotiated

encapsulation ppp

dialer pool 1

dialer idle-timeout 30

dialer string 384040

dialer watch-group 1

dialer-group 1

!

! Primary interface associated with physical ATM0 interface, dialer pool 2 associates it 

with ATM0’s dial-pool-number2

interface Dialer2

ip address negotiated

ip mtu 1492

encapsulation ppp

dialer pool 2

dialer-group 2

no cdp enable

!

ip classless

!Primary and backup interface given route metric

ip route 0.0.0.0 0.0.0.0 22.0.0.2

ip route 0.0.0.0 0.0.0.0 192.168.2.2 80

ip http server

!

!Watch for interesting traffic

dialer watch-list 1 ip 22.0.0.2 255.255.255.255

!Specifies interesting traffic to trigger backup ISDN traffic

dialer-list 1 protocol ip permit

!

The Cisco 1812, Cisco 1801, Cisco 1802, and Cisco 1803 routers use the ISDN S/T port for dial backup 
and remote management. Perform the following tasks to configure dial backup and remote management 
through the ISDN S/T port of your router:

Traffic of interest must be present to activate the backup ISDN line by means of the backup interface and 
floating static routes methods. Traffic of interest is not needed for the dialer watch to activate the backup 
ISDN line.