Cisco Systems OL-6426-02 Benutzerhandbuch

13-15

Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide

OL-6426-02

Chapter 13 Configuring Dial Backup and Remote Management

Configuring Dial Backup and Remote Management Through a V.92 Modem

Line Configuration

Perform these steps to configure the line on the V.92 modem, beginning in global configuration mode:

Command

Purpose

Step 1

line line-number

Example:

Router(config)# line 1

Router(config-line)

Identifies a specific line for configuration and
enters line configuration collection mode.

Note

The number entered here must be the same
as the number entered for the
asynchronous serial interface.

Step 2

modem inout

Example:

Router(config-line)# modem inout

Router(config-line)#

Configures the line for both incoming and
outgoing calls.

Step 3

autoselect {arap | ppp | slip | during-login |
timeout seconds}

Example:

Router(config-line)# autoselect ppp

Router(config-line)#

Configures the line to automatically start an
AppleTalk Remote Access (ARA), PPP, or SLIP
session.

Note

We recommend ppp for use with the dial
backup feature.

Step 4

transport input {all | lat | mop | nasi | none |
pad | rlogin | telnet | v120}

Example:

Router(config-line)# transport input all

Router(config-line)#

Defines which protocols can be used to connect to
the line.

Note

We recommend all for use with the dial
backup feature.

Step 5

exit

Example:

Router(config-line)# exit

Router(config)#

Exits line configuration mode, and enters global
configuration mode.