Graco 247936 Benutzerhandbuch
Installation
18
312900G
Flush
1.
Turn ES ON/OFF switch OFF (O).
2.
Relieve pressure, page 19.
3.
Change fluid source to solvent, or disconnect fluid
line and connect solvent supply line to gun.
line and connect solvent supply line to gun.
4.
Point gun into grounded metal pail. Flush until clean
solvent flows from gun.
solvent flows from gun.
5.
Relieve pressure, page 19.
6.
Hang gun from hook. Nozzle must point down.
Fire, Explosion, and Electric Shock Hazard
Read Fire and Explosion, and Electric Shock
Hazards, page 3. Follow steps 1-6 below to flush the
gun when using gun first time, changing colors, before
fluid dries, at end of day, and before storing gun.
Hazards, page 3. Follow steps 1-6 below to flush the
gun when using gun first time, changing colors, before
fluid dries, at end of day, and before storing gun.
NOTICE
This gun has nylon components which will be dam-
aged if you use methylene chloride as a flushing or
cleaning solvent.
aged if you use methylene chloride as a flushing or
cleaning solvent.
ti12724_x2
ti1934
ti1287a
ti1934
ti1934
ti12718