Wagner SprayTech 9195 Benutzerhandbuch

English

Cleaning the Inlet Valve

Cleaning or servicing the inlet valve may be required if the unit has priming problems. Priming problems may be

prevented by properly cleaning the sprayer and following the long-term storage steps.

1. Remove the suction set.

3. Lubricate the O-ring on the inlet valve (b). Replace inlet

valve assembly by screwing it into the sprayer. Torque

to 23-27 ft lbs (9145, 9155) or 32-38 ft lbs (9175. 9195).

2. Unscrew the inlet valve assembly (a) from the sprayer.

Visually inspect the inside and outside of the inlet valve

assembly. Clean any paint residue with the appropriate

cleaning solution.

4. Replace suction set and hand-tighten.

(a)

(b)

If priming problems persist, you may need to replace the

inlet valve assembly. Call Technical Service (1-800-880-

0993) to order new inlet valve assembly.