Wagner SprayTech 9175 Benutzerhandbuch

English

 

16 

 

  1.  Lock the gun and turn the pump OFF (O).

  3.  When suction set is clean, thread the suction tube back 

into the inlet valve, and replace the return tube onto the 

return tube fitting.  Replace clip.

  5.  Turn the PRIME/SPRAY knob to PRIME. Turn the pump 

ON (l), and trigger the gun once into a waste container 

to relieve pressure.

  6.  Let the pump circlulate cleaning solution through the 

suction set for 2-3 minutes.  Turn the pump OFF.  

  2.  Remove the suction hose and return tube and clean it 

using the appropriate cleaning solution. You should also 

wipe the threads of the inlet nut (a) and remove and 

clean the inlet filter.

  4.  Submerge the suction set into a bucket of new cleaning 

solution.