Wagner SprayTech 9175 Benutzerhandbuch

English

Before you Begin -

This section contains instructions that

will be repeated throughout this manual.

Locking the Spray Gun

Always lock the trigger off when attaching the spray

tip or when the spray gun is not in use.

GX-05 / GX-07

The gun is locked when the trigger lock is at a 90º angle

(perpendicular to the trigger in either direction).

GX-08

To lock the gun, turn the trigger lock forward and slightly down

until it stops.

Pressure Relief Procedure

Be sure to follow the Pressure Relief Procedure when shutting the unit off for

any purpose. This procedure is used to relieve pressure from the spray hose.

1. Lock the spray gun off (see

directions above). Flip the ON/

OFF switch to the OFF position.

2. Turn the PRIME/SPRAY knob to

PRIME.

3. Unlock the spray gun and trigger

spray gun into the side of the

material bucket. Lock the spray

gun.

Grounding the Spray Gun (oil-based materials only)

If spraying or cleaning with with oil-based materials, the

spray gun must be grounded while preparing the spray

hose or cleaning.
Ground the gun by holding it against the edge of a metal

container while purging. Failure to do so may lead to a

static electric discharge which may cause a fire.
Keep hands clear of the fluid stream.

GX-05

GX-07

GX-08

SPRAY