Wagner SprayTech EP2205 Benutzerhandbuch

16

Brushes should be inspected periodically to insure uninter-
rupted service. Their  life depends on speed as well as load.

 If one of the brushes measures less than 1/4'' or is worn
roughly or chipped, replace both motor brushes.   It is also
recommended that brushes be checked when packings are
replaced.

1.  Disconnect power cord from electrical supply.

2. Remove the four (4) motor shroud mounting screws

and remove the motor shroud.

3. Unscrew and remove brush caps holding brushes in

place.

4. Remove brushes.

5. Replace with new brushes.

6. Replace brush caps.

7. Replace motor shroud and screws.