Wagner SprayTech 110v Benutzerhandbuch

 

Unplug the power plug from the outlet before carrying out 

any repair work.

SAFETY REGULATIONS

The front end must always point downwards in order to avoid 

sliding away.

If possible do not use the unit on an inclined surface since the 

unit tends to wander through the resulting vibrations.

Super Finish 23 PLUS is an electric driven unit for the airless 

atomization of different painting materials. Also it is able to 

feed the internal feeded paint roller, which is available as ac-

cessory.

Super Finish 23 PLUS is made for jobs in the workshop and on 

the building site.

The unit performance is conceived so that its use is possible 

on building sites for small- to middle-area dispersion work.

When painting, the device is suitable for all kinds of typical 

painting jobs, e.g.:

doors, door frames, balustrades, furniture, woodencladding, 

fences, radiators (heating) and steel parts.

We recommend using the top container for paintwork.

Diluting lacquers and paints or those containing solvents, two-

component coating materials, dispersion and latex paints.

No other materials should be used for spraying without WAG-

NER‘s approval.

Pay attention to the Airless quality of the 

coating materials to be processed.

The unit is able to process coating materials with up to 

20,000 mPas. If highly viscous coating materials cannot be 

taken in or the performance of the unit is to low, the paint 

must be diluted in accordance with the manufacturer‘s in-

structions.

Attention: Make sure, when stirring up with 

motor-driven agitators that no air bubbles 

are stirred in. Air bubbles disturb when spray-

ing and can, in fact, lead to interruption of 

operation.

These particles have a strong wear and tear effect on valves 

and tips, but also on the heating hose and spray gun. This im-

pairs the durability of these wearing parts considerably.