Hitachi NV 83A3 Benutzerhandbuch

5

 

The Nailer produces sparks during operation.

  Never use the Nailer in sites containing lacquer, 

paint, benzine, thinner, gasoline, gases, adhesive 

agents, and other materials which are combustible or 

explosive.

 

Do not let visitors handle the Nailer.

 

All  visitors  should  be  kept  safely  away  from  work 

area.

 

Do not wear loose clothing or jewelry as they can be 

caught in moving parts.

  Rubber gloves and nonskid footwear are 

recommended when working outdoors.

 

Wear protective hair covering to contain long hair.

  If a non relieving coupler is used on the Nailer, 

the Nailer can remain charged with air after 

disconnecting and thus will be able to drive a fastener 

even after disconnecting.

  The Nailer and air hose must have a hose coupling 

such that all pressure is removed from the Nailer 

when the coupling joint is disconnected.

  Make sure the push lever operates properly. 

(The push lever may be called “Safety”.) Never 

use the Nailer unless the push lever is operating 

properly, otherwise the Nailer could drive a fastener 

unexpectedly. Do not tamper with or remove the push 

lever, otherwise the push lever becomes inoperable.

  Keep all screws and covers tightly mounted. Check 

their condition periodically.

 

Never use the Nailer if parts are missing or damaged.

  When loading fasteners into the Nailer or when 

connecting the air hose,

1)  do not depress the trigger;

2)  do not depress the push lever; and

3)  keep the Nailer pointed downward.

  Never place your hands or feet closer than 8 inches 

(200 mm) from the fi ring head.

  A serious injury can result if the fasteners are 

defl ected by the workpiece, or are driven away from 

the point of entry.

  Do not drive fasteners on top of other fasteners or 

with the Nailer at too steep of an angle; the fasteners 

can ricochet and hurt someone.

  This Hitachi nailer includes a nailing operation 

switching device.

  Before starting work, check the setting of the 

operation switching device.

  If the switching device is not set properly, the nailer 

will not operate correctly.

 

If the push lever is unintentionally allowed to re-contact 

the workpiece following recoil, an unwanted fastener 

will be driven.

 

In order to avoid this undesirable double fi re,

○  Intermittent operation (Trigger fi ring)

1)  Set the switching device to SINGLE SEQUENTIAL 

ACTUATION MECHANISM.

2)  Pull the trigger rapidly and fi rmly.

○  Continuous operation (Push lever fi ring)

1)  Do not press the nailer against the wood with 

excessive force.

2)  Separate  the  nailer  from  the  wood  as  it  recoils 

after nailing.

 

The fasteners can be driven through or away from the 

workpiece and hit someone.

 — Continued

000Book_NV83A3_US.indb   5

000Book_NV83A3_US.indb   5

2011/07/24   10:31:13

2011/07/24   10:31:13