disk2go USB Stick PURE T5 1GB 30005104 Merkblatt
Produktcode
30005104
PURE
Specifications
Rev. 1.3
Copyright © 2005 - 2007 disk2go®. All rights reserved.
Page 1/2
All other product and brand names are the property of their respective owners. This document is for information use only and is
subject to change without prior notice. disk2go® assumes no responsibility for any errors that may appear in this document.
subject to change without prior notice. disk2go® assumes no responsibility for any errors that may appear in this document.
Interface
USB 2.0 high-speed (certified) / with High- and Full-Speed capabilities
Power Supply
USB bus-powered:
4.4 – 5.25V
Power Consumption
Suspend Current:
Operating Current:
<500 µA (typical & max)
<100 mA (typical)
<180 mA (max)
Performance (USB 2.0 High Speed)
Performance (USB 2.0 Full Speed)
256 MB & 512 MB Models:
1 GB Model:
2 GB - 8 GB Models:
All Models:
Read:
22 MB/sec.
Write: 11 MB/sec.
Read:
24 MB/sec.
Write: 12 MB/sec.
Read:
24 MB/sec.
Write: 11 MB/sec.
Read:
0.9 MB/sec.
Write: 0.9 MB/sec.
Performance Measurement
Using industry-standard benchmark software on a high-end platform.
Model Code / Size
EAN Code
7640111161196
7640111161202
7640111161219
7640111161226
7640111161776
7640111162223
Flash Size
usable size (FAT formatted)
256 Megabyte
225’548 KB
512 Megabyte
501’104 KB
1 Gigabyte
950’528 KB
2 Gigabyte
1’970’400 KB
4 Gigabyte
3'843’212 KB
8 Gigabyte
Flash Type
Single Level Cell (SLC) NAND Flash
Dimensions (LxWxH)
With Cap
8.4 x 2 x 1cm
Weight
14 grams without keyring
Operating Systems
Without Driver:
With Driver:
(available at disk2go.com)
(available at disk2go.com)
Windows XP (all editions & releases)
Windows 2003 (all editions & releases)
Windows 2000 (all editions, SP2 and above)
MAC OS X (10.x and higher)
Linux 2.6.x
Windows 98SE
LED Indicator
off:
rapid blinking:
connected and inactive
transferring/receiving data or engaged in the
identification process
identification process
Software
freely available at disk2go.com
freely available at disk2go.com
disk2go® KeySafe™
disk2go® MyKey™
Data security
Write protection
Data synchronization
Data synchronization
Data Security with disk2go®
KeySafe™
KeySafe™
Security architecture combines hardware-based security and disk2go’s® KeySafe
software application that enables users to activate the embedded security
features. It Implements a double security mechanism, access control and data
encryption, based on SHA-1 and AES (256bit) algorithms.
software application that enables users to activate the embedded security
features. It Implements a double security mechanism, access control and data
encryption, based on SHA-1 and AES (256bit) algorithms.
Service/Warranty
2 year full warranty