Echo PPT-2400 Benutzerhandbuch

• Before starting the unit, equip yourself and fellow workers in the 15 M

(50 ft.) safety zone with the required protective equipment and
clothing.

• Review the area to be trimmed. Look for hazards that could

contribute to unsafe conditions such as overhead electrical lines or
dead branches.

• Spectators, children and animals must be prevented from coming

nearer than 15 M (50 ft.) while the pruner is in use.

1.

Stop Switch - Start/Run.
Move stop switch button (A) forward away from the STOP
position.

2.

Choke Lever - Cold Start.
Move choke (B) to “Cold Start” Position.

3.

Primer Bulb -Prime.
Pump primer bulb (C) 10 times. Fuel will be visible and flow freely in
the clear fuel tank return line.

The cutting attachment should not rotate at idle. If cutting
attachment moves, readjust carburetor according to "Carburetor
Adjustment" instructions in this manual or see your ECHO Dealer,
otherwise serious personal injury may result.

• Provide all operators of this equipment with the Operator's Manual

and instructions for safe operation.

• Before starting the unit, equip yourself and any other person

working within the 15 M (50 ft.) Safety Zone with the required
Protective Equipment and clothing.

• Always evaluate the area being cut for overhead hazards, such as

dead branches which may fall and strike the operator or helpers.

• Be aware of branches bouncing when striking the ground.
• Larger branches should be removed in sections.
• During operation, the complete unit, especially the shaft tube and the

cutting attachment may become very hot, too hot to touch.  Avoid
contact during and immediately after operation.