Cub Cadet ST26 Benutzerhandbuch

9

1

Gear Case

2

Grip

3

Throttle Wire

4

Throttle Lever

5

Hanger

6

Shoulder Band (Standard on ST35)

1

2

3

4

5

6

7

8

9

10

11

12

 7

Engine

 8

Head/Blade

 9

Deflector

10

Stop Switch

11

Drive Tube

12

Loop Handle

• This unit can be dangerous and cause serious 

injury if improperly used. To reduce injury risk to 
operator, helpers and bystanders, read and 
understand the Operator and Safety Manual.

• Blindness can occur from objedts that are thrown 

or ricochet even with shield in place. Operators, 
helpers and bystanders must wear eye protec-
tion, ANSI Z87.1 approved.

• Always wear hearing protection when operating 

unit.

• Use caution when refueling hot engine. Never 

refuel while engine is on.

• Prevent accidental contact with unit and any cuting 

attachment. Maintain a 50 ft. (15 m) radius, DAN-
GER ZONE surrounding the operator. ONLY the 
operator, dressed in proper protective clothing 
should be in the DANGER ZONE.

• Beware of KICKOUT

【

】

when using 

blades. Special precautions are necessary for 
blade operation, see your Operator and Safety 
Manual.  ONLY install manufacturer approved 
blades on Brushcutter models equipped with prop-
er blade shields, harness, blade collar, nut and cot-
ter pin.

• Blade/Cutting attachment does not stop immediately 

after releasing throttle. Keep hands and feet clear of 
blade/cutting attachment unless engine is shut off 
and cutting attachment is not moving.

• INSPECT BLADES BEFORE USE.
• DO NOT USE DAMAGED, CRACKED, BENT, DULL 

OR IMPROPERLY SHARPENED BLADES.

• Do not remove shields modify the unit or install 

attachments or parts not approved by manufacturer. 
Approved attachment information and replacement 
Operator and Safety Manual are available from man-
ufacturer.

kickout