Sears 172.71816 Benutzerhandbuch

ASSEMBLY & ADJUSTMENTS cont.

INSTALLING THE LITHIUM-ION BATTERY PACK (Fig. 4)

Insert the battery pack into grass trimmer’s battery port. A simple

push and slight pressure will be sufficient.

CAUTION:

When inserting batteries into this product, the proper

polarity or direction must be observed. Reverse insertion of batteries can

result in leakage or explosion. (Applies to product employing more than

one separately replaceable primary battery.)

WARNING:

This Cordless Trimmer is always in operating condition

when the battery pack is installed. Therefore, the Safety On Button should

always be in the released position locking the power off, when the tool is

not in use or you are carrying it at your side. The trigger switch will not

turn the trimmer ON until the Safety On Button is depressed.

WARNING:

To avoid injury, ALWAYS remove the battery from the

trimmer BEFORE installing parts, cleaning the trimmer, making any

adjustments or storing the trimmer

Fig. 4

ASSEMBLY & ADJUSTMENTS cont.

INSTALLING THE SAFETY GUARD (Figs. 5 and 5a)

INSTALLING THE EDGE GUIDE

WHEELS (Fig. 6)

1. Remove the battery pack from the trimmer.

2. Turn the trimmer’s motor housing head over to provide access to underside base

of the head by the cutting line spool.

3. Locate the single screw in the base of the head and remove the screw.

4. Insert the edge of the safety guard into the slot along the back of the trimmer’s

head, carefullly lining the screw hole in the guard up with the screw hole in the

trimmer head.

5. Insert screw and securely attach the safety guard (see Figs. 5 and 5a).

Your trimmer comes with a set of Edge

Guide Wheels that is handy for use as a

cutting guide. It can be used to help keep

the cutting line away from items you

don’t want cut, such as flowers, or

damaged, such as fences or screens.
Each end of the wheel assembly guide

is secured in its position on the motor

housing with two screws, included, see

Fig. 6. Check Edge Guide Wheels to

make sure they are properly located

and secure.

NOTE: THE SAFETY GUARD MUST BE ATTACHED to the trimmer head

before use.

NOTE: Safety Guard will only fit one way.

Fig. 5a

Line

Cutter

Fig. 5

Fig. 6