Husqvarna 323RII Benutzerhandbuch
ASSEMBLY
12 – English
Fitting the handlebar (323RII)
•
Remove the screw at the rear of the throttle handle.
•
Slide the throttle handle onto the right side of the
handlebar, (see diagram).
handlebar, (see diagram).
•
Align the screw hole in the throttle handle with the hole
in the handlebar.
in the handlebar.
•
Refit the screw in the hole in the rear of the throttle
handle.
handle.
•
Screw the screw through the handle and handlebar.
Tighten it.
Tighten it.
•
Unscrew the knob from the handlebar mounting.
•
Position the handlebar as shown. Fit the mounting
components and tighten the knob lightly.
components and tighten the knob lightly.
•
Put on the harness and hang the machine from the
support hook. Now make a final adjustment so that
support hook. Now make a final adjustment so that
the machine is in a comfortable working position when
it hangs from the harness. Tighten the knob.
it hangs from the harness. Tighten the knob.
Fitting the handlebar (327Rx,
327RDx)
327RDx)
•
Remove the screw at the rear of the throttle handle.
•
Slide the throttle handle onto the right side of the
handlebar, (see diagram).
handlebar, (see diagram).
•
Align the screw hole in the throttle handle with the hole
in the handlebar.
in the handlebar.
•
Refit the screw in the hole in the rear of the throttle
handle.
handle.
•
Screw the screw through the handle and handlebar.
Tighten it.
Tighten it.
•
Unscrew the knob from the handlebar mounting.