Oracle Audio Technologies 2500 MK II Benutzerhandbuch

Seite von 21
 
 
 
 
 
 
SUSPENSION FINE TUNING 
 
Caution!  
Do not attempt to lift the main chassis from the suspension towers as this could 
damage the connecting cable between the display module and the main chassis. 
If the main chassis needs to be removed, a special technical document is 
available from Oracle Audio Technologies or your local area distributor. This 
work should always be carried out by an experienced and competent technician. 
 
•  Place your Oracle CD player on a flat surface to complete the set up procedure. 
 
Suspension fin Tuning 
 
The suspension of your Oracle CD turntable has been calibrated at the factory but it possibly 
might require minor fine-tuning before putting the player into service. To help with this we have 
supplied a suspension calibration tool to assist with accurate measurement and calibration of 
each suspension tower. 
 
Note:  
Before beginning this step, very carefully seat the aluminium top cover above the 
compact disc in its specially machined recess and position, so that the two finger 
slots match the one on the player main chassis. The slightly curved section of the 
finger slots should be facing the front of the unit. This will give a more accurate 
operational mass of the main chassis. 
 
This picture indicates the target setting of the suspension system. 
 
 
 
 
The tool supplied will help you determine if a suspension fine tuning is required. If no or only 
minor changes need to be performed, you might select to leave the system as it is. At this point, 
the suspension top covers can be installed and the player moved to its final playing location. To 
complete the final leveling of the plinth, it will be necessary to use a spirit level. The leveling will 
be achieved by adjusting the height of the threaded feet under the plinth. 
Oracle Audio Technologies 
CD 2500 MK II player / CD 2000 transport Owner’s manual 
7