Moxa Technologies AWK-1200-AP Benutzerhandbuch
MOXA AirWorks AWK-1200-AP User’s Manual
Web Console Configuration
3-9
Restore Configuration from File
Use this option to load previously saved Access Point configuration settings.
Use this option to load previously saved Access Point configuration settings.
Save Configuration To Wireless Network Setup Wizard
If your PC’s operating system is Windows XP Service Pack 2 (SP2) or later and you are using
Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the
Access Point’s current wireless security settings to your PC with Windows Connect Now (WCN)
technology. The settings will then be available to propagate to other wireless devices.
If your PC’s operating system is Windows XP Service Pack 2 (SP2) or later and you are using
Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the
Access Point’s current wireless security settings to your PC with Windows Connect Now (WCN)
technology. The settings will then be available to propagate to other wireless devices.
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on
the Access Point’s internal system clock.
the Access Point’s internal system clock.
Set the Date and Time Manually
If you do not have the NTP Server option in effect, you can either manually set the time for your
Access Point here, or you can click the Copy Your Computer’s Time Settings button to copy the
time from the computer you are using. (Make sure that computer’s time is set correctly.)
Access Point here, or you can click the Copy Your Computer’s Time Settings button to copy the
time from the computer you are using. (Make sure that computer’s time is set correctly.)
NOTE
If the Access Point loses power for any reason, it cannot keep its clock running, and will not have
the correct time when it is started again. To maintain the correct time for schedules and logs, you
must either enter the correct time after you restart the Access Point, or you must enable the NTP
Server option.
the correct time when it is started again. To maintain the correct time for schedules and logs, you
must either enter the correct time after you restart the Access Point, or you must enable the NTP
Server option.
System
This section allows you to reboot the device, and restore the Access Point to the factory default
settings. Restoring the unit to the factory default settings will erase all settings, including any rules
that you’ve created.
settings. Restoring the unit to the factory default settings will erase all settings, including any rules
that you’ve created.