Cooper Lighting MV4MR Merkblatt

11/16/2007 11:28:04 AM

Consult your representative for additional options and finishes.

ADI070185

Recessed downlight luminaire with 2 inch square regressed pinhole 
aperture utilizing a low voltage MR16 tungsten-halogen lamp. Modular 
platform can be reconfigured from below the ceiling to accept a broad range 
of lamp modules and optical elements. Platform is suitable for direct contact 
with insulation and 2x8 residential construction. Platform + module + 
element combination supports various lamp beam spreads for desired 
optical distribution with excellent light control and low aperture brightness.

Frame
Galvanized steel plaster frame with 
integral bar hanger receivers. 
Setscrews provide positive 
horizontal locking.

Collar
Matte black steel collar adjusts 
vertically for 1/2" - 1" thick ceilings 
and can be rotated +/- 7.5° thru the 
aperture. Integral gun sights 
facilitate the use of guide strings or 
laser lines. Shipped with a paint 
overspray protector installed in the 
collar.

Lamp Module
Installed or removed thru the 
aperture or from the top and 
allows lamp orientation at 0°, 90°, 
180° and 270° positions.

Housing
Double wall aluminum housing 
painted matte black for a visually 
dark interior. All fasteners are 
captive.

Gaskets
Closed cell gaskets achieve 
restrictive airflow requirements 
without additional caulking.

Bar Hangers
Captive preinstalled bar hangers 
adjusts from 8-1/2" to 24" wide; 
pass thru feature allows shortening 
without removal. Captive nail 
penetrates standard and 
engineered lumber. Mounting 
flange levels platform with ceiling. 
Integral clip attaches directly to 
t-bar.

Splay
Diecast aluminum splay has 
truncated paramid with regressed 
square aperture providing minimal 
ceiling presence. Can be painted to 
match ceiling finish. Mousetrap 
type springs pull flange tight to 
ceiling. Light trap eliminates spill 
light at edge of flange. May also be 
installed rimless using optional 
plastering lathing ring.  Provided 
with both straight and angle cut 
parabolic shielding cone, shipped 
with angle cut version installed.

Junction Box
(7) 1/2" trade size pry outs, (3) 
integral clamps for non-metallic 
cable. Rated for (4) #12 thru branch 
circuits. Wago® type push wire 
connectors for field connections

Thermal Protector
Self-resetting thermal protector 
protects against improper lamping.

Transformer
Integral dual output toroidal 
magnetic transformer, 120V 
50/60Hz input, 12V nominal 75VA 
maximum output. Separate output 
for circuits controlled by dimmers 
compensates for losses in 
dimmers, improves color 
temperature and lumen output.

Lamp Capsule
Ceramic GX5.3 lamp holder 
mounts to an aluminum heat sink 
to dissipate heat. Connects to the 
transformer with electrical quick 
connects. Accepts 2 lenses, filters 
or optional lamp snoot.

Code Compliance
Thermally protected, IP labeled, 
cULus listed for damp locations 
and ASTM-E283 AIRTITE(tm). 
Suitable for direct contact with 
insulation.

50W MR16

Tungsten-Halogen

2“

(51mm)

5-3/4“

(146mm)

Lamp Wattage

Input Power

Input Current

(Nominal)

(Watts)

(Amps)

20

21

0.17

35

37

.031

37

39

0.32

42

44

0.37

50

53

0.44

14-9/16”

(369mm)

8-1/2”

(216mm)

4-9/16”

(115mm)

4-5/16”

(126mm)

Cutout=5-3/16”

             (132mm)

C o m p l e t e u n i t c o n s i s t s o f p l a t f o r m ,   l a m p   m o d u l e   a n d   o p t i c a l   e l e m e n t .  

P408ICAT = 4” Square

Aperture IC Housing

MV4MR = MR16 

Vertical Lamp 

Module, 120V Input

E4RPIN = 2” Square 

Aperture Regressed 

Pinhole

P408ICAT MV4MR

Blank] = Self Flanged,

Matte White Flange
RL = Rimless, Matte

White Flange

PLR4x4 = Plaster Lathing Ring

(For Use With E4PINRL Only)
RLA4x4 = Rimless Adapter

(For Use With E4PINRL Only)

LSA16 = Matte black lamp snoot accessory

L Series - Filter Media For MR16 lamps 

(See Accessories specification sheet)

IRIS