Bad Boy Mowers 02.9812.0001C Benutzerhandbuch
B
AD
B
OY
™ S
POT
L
UMINAIRE
U
SER
M
ANUAL
6 2
02.9812.0001C
Removing the Enclosure Covers
To access interior enclosure components, one or both of the Upper Enclosure Covers may need to be
removed.
Parts:
removed.
Parts:
21.9812.0820
1 EA ASSY, INTAKE COVER, UPPER ENCLOSURE
21.9812.0830
1 EA ASSY, EXHAUST COVER, UPPER ENCLOSURE
Tools and Supplies:
#2 Philips screwdriver
To remove Upper Enclosure Covers:
Step 1. At Upper Enclosure Cover, loosen two captive screws.
Step 2. Remove cover by pulling straight out until lip clears yoke support.
Step 1. At Upper Enclosure Cover, loosen two captive screws.
Step 2. Remove cover by pulling straight out until lip clears yoke support.
CAUTION: The Upper Enclosure Covers are not identical. One is for the Intake side and one for the
Exhaust side. Be sure to re-install covers in the proper location.
Exhaust side. Be sure to re-install covers in the proper location.
Figure 4-3: Removing Upper Enclosure Covers
Intake Cover
Exhaust Cover
Captive Screw (2)
Mesh Screen
PRG Sticker