Chauvet Work Light Benutzerhandbuch
5. Appendix
10
5/7/2010 1:21 PM
4.
O
PERATING
I
NSTRUCTIONS
Footswitch operation
The included footswitch provides quick access to preset colors, color change programs, and sound
triggering via the onboard microphone on the Mini
4BAR™. Please see the chart, along with the set of
instructions, below for further explanation.
1.
Power on the fixture.
2.
Connect the footswitch to the Mini
4BAR™ via the 3-pin connection cable with plug.
Auto
Press pedal #1 to scroll through the auto programs and the static colors.
Blackout
Press pedal #2 to activate the Blackout function.
Sound
Press pedals #1 & #2 simultaneously to activate sound operation.
P
EDAL
S
UB
-
OPTION
F
UNCTION
1
(P
RESET
)
1 x press
Auto program-color change
2 x press
Auto program-color fade
3 x press
Red
4 x press
Green
5 x press
Blue
6 x press
Cyan
7 x press
Magenta
8 x press
Yellow
9 x press
White
2
(B
LACKOUT
)
-
Blackout
The fixture will start up in sound mode when first powered ON.
The fixture will cycle through the auto programs and static colors very rapidly if pedal #1 is held down.
This will seem like a very fast auto program. When releasing the pedal, the fixture will stop on the
program in the cycle.
program in the cycle.
After activating Blackout, pedal #2 will NOT release the blackout. Press pedal #1 to activate Auto mode,
or press pedals #1 & 2 simultaneously to activate Sound mode.
or press pedals #1 & 2 simultaneously to activate Sound mode.
Pedal #1
(Auto Program Selection)
Pedal #2
(Blackout)
(Blackout)