Woodstock W1410 Benutzerhandbuch
-4-
Shop Fox
®
Fence
B. UNPACKING
The Item W1410 Shop Fox
®
Fence is shipped
from our factory in a carefully packed carton. If
you discover the product is damaged, please con-
tact your local Woodstock dealer immediately for
advice. Be sure to save the packing containers for
possible inspection.
The Shop Fox
®
Fence weighs only 35 pounds.
However, when lifting, we must caution against
improper lifting techniques. Always keep your
back straight and lift with your legs. If you are
limited by the amount of weight you can lift and
carry, please refrain from moving The Shop Fox
®
Fence until you get the necessary assistance.
D. CLEAN UP
Remove the plastic protective covering and wipe
the fence off with a clean rag. Inspect all the parts
(especially the contact areas) for burrs and other
irregularities that might hinder assembly. If you
find any burrs or “flash” from the machining or
casting process, simply sand or file them flat.
Although this is not a common occurrence, it is
possible that one or more of the parts could have
been missed during the machining and deburring
process.
the fence off with a clean rag. Inspect all the parts
(especially the contact areas) for burrs and other
irregularities that might hinder assembly. If you
find any burrs or “flash” from the machining or
casting process, simply sand or file them flat.
Although this is not a common occurrence, it is
possible that one or more of the parts could have
been missed during the machining and deburring
process.
C. PIECE INVENTORY
The parts are arranged in two layers of packing.
Remove the parts in an orderly fashion. This will
simplify identification and make inventory and
assembly that much easier. When removing the
parts, please take care not to destroy the foam and
cardboard carton. It is a good idea to save the car-
ton for future storage or shipment if necessary.
Remove the parts in an orderly fashion. This will
simplify identification and make inventory and
assembly that much easier. When removing the
parts, please take care not to destroy the foam and
cardboard carton. It is a good idea to save the car-
ton for future storage or shipment if necessary.
In the event that any parts or hardware are miss-
ing, please contact Woodstock at the phone num-
ber or address found on page 2 and we will send
replacements right away.
Piece count for the W1410 Shop Fox
®
Fence.
Qty Description
1 Shop Fox
®
Fence
1 Front rail
1 Back Rail
1 Manual
1 Scale
1 Bag of Mounting Hardware
1 Universal Blade Guard Bracket (optional)
Mounting Hardware Consists of:
4
3
⁄
8
" - 16 x 1" Hex Bolts
9
3
⁄
8
" Flat Washers
1
5
⁄
16
" Drill Bit
1
3
⁄
8
" - 16 Tap
1 Rubber Bumper w/ Mounting Hardware
1 Cross Brace w/ Mounting Hardware