Whirlpool C10748446C Benutzerhandbuch



1. Press BROIL for the desired oven.
2. Press the number keypads as instructed by the scrolling text to set the desired temperature.
3. Press START for the selected oven, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and leave the door open 4½" (11.4 cm) at the broil stop 

position.

5. Press CANCEL for the selected oven when finished.

1. Press CONVECT until the desired mode is displayed.
2. Press the number keypads to set the desired temperature. If the temperature entered is not 

in the range of the temperatures allowed, the minimum or maximum allowed temperature 
will be displayed. Enter a temperature in the allowable range.

3. Press START LOWER.
4. To change the temperature, repeat Step 2. Press START LOWER for the change to take 

effect.

5. Press CANCEL LOWER when finished.



1. Press TOAST.
2. Use the number keypad to select the desired toast setting.
3. Press START UPPER.
4. Press CANCEL UPPER when finished. 



Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not 

in the range of the temperatures allowed, the minimum or maximum allowed temperature 
will be displayed. Enter a temperature in the allowable range.

3. Press START for the selected oven. 
4. Press CANCEL for the selected oven when finished.

The Start Time keypad is used to enter the starting time for an oven function with a delayed 
start. Start Time should not be used for foods such as breads and cakes because they may not 
bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of 
time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.



Press WARM ZONE ON to select the warming element on the cooktop. Press START UPPER.
Press WARM ZONE OFF to turn off the warming element.

See the “Self-Clean Cycle” section.

1. Check that the ovens and timers are off.
2. Press and hold START LOWER for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.

Enables you to personalize the audible tones and oven operation to suit your needs. See the 
“Oven Use” section.